Skip to Content

Guard Wash

(0 review)

REMOVES ORGANIC STAINS AND BUILD-UP

✓  Very Fast Acting
✓  No Rinsing Required
✓  Does not damage stone, concrete or masonry
✓  Non-Corrosive, Acid Free
✓  Highly effective against microbial growths and stains

Read More >>
How to Apply >>

$ 78.00 $ 78.00


  • Size
  • Composition
  • Performance
  • Surface Application
  • Surface Application
  • Surface Application
Terms and Conditions
30-day satisfaction guarantee
Free Shipping on orders over $100
Guard Wash

Guard Wash® Cuts through Grime Fast
Leaving Surfaces looking Fresh, Clean and Like New!

Discover Its
Main Three Benefits

1

Fast-Acting Clean

Guard Wash® delivers rapid deep-cleaning power to remove black stains, pollution marks, algae and grime from walls, roofs and paved surfaces 


2

Restores Surfaces Like New

It brings surfaces back to their original appearance without damaging colour, texture or the material itself

3

Multi-Surface Versatility

Suitable for stone, concrete, render, tiles, wood and more, making it an easy all-in-one cleaner for exterior surfaces. 

Guard Wash® Cuts 
Through Grime Fast to leave Surfaces Looking Fresh, Clean & Like New!

Discover Its
Main Three Benefits

1

Fast-Acting Clean

Guard Wash® delivers rapid deep-cleaning power to remove black stains, pollution marks, algae and grime from walls, roofs and paved surfaces 


2

Restores Surfaces Like New

It brings surfaces back to their original appearance without damaging colour, texture or the material itself

3

Multi-Surface Versatility

Suitable for stone, concrete, render, tiles, wood and more, making it an easy all-in-one cleaner for exterior surfaces. 

Guard Wash

Why Choose Guard Wash®?

Guard Wash

Why Choose
Guard Wash®?

A High-Performance Cleaner for Porous Surfaces


GuardWash® is a high-performance cleaner formulated to remove organic staining and common surface contamination from porous building materials. It effectively tackles mould, mildew, algae, moss, tannins, leaf marks, pollution, greasy stains and other moisture-related soiling that can build up on exposed surfaces.

Fast Deep Cleaning Action


GuardWash® is designed for simple, efficient application. Apply the product directly to the affected surface and allow it to work—no rinsing is normally required. For surfaces where residue needs to be removed, GuardWash® can be rinsed approximately 24 hours after application.

The product can also be left on the surface to provide a residual cleaning effect.

Its powerful formula penetrates deep into the surface to break down stubborn organic build-up without damaging the material underneath. Ideal for both residential and commercial applications, Guard Wash® delivers professional-grade cleaning results with minimal effort.

Guard Wash® can be used on renders, walls, roofs, floors, paving, concrete, stone, tiles and other exterior materials, making it a versatile solution for ongoing maintenance and restoration projects.

Gentle on Porous Building Materials


GuardWash® is free from potash, hydrochloric acid and phosphoric acid. Unlike harsh acidic or corrosive cleaning products, it is designed to clean without damaging suitable treated surfaces or altering their colour.

This makes GuardWash® a versatile choice for cleaning and maintaining porous materials including concrete, natural stone, artificial stone and terracotta.

Key Benefits


  • Removes mould, algae, lichen and organic stains
  • Restores surfaces to a clean, like-new appearance
  • Suitable for walls, roofs, floors and render
  • Fast-acting and easy to apply
  • Helps maintain and extend surface appearance  

Ideal for Green and Black Staining


Porous surfaces exposed to moisture and the elements can develop unsightly green, black or brown staining over time. GuardWash® is specifically designed to address organic contamination such as mould, mildew, algae, moss and tannins, helping restore the appearance of weathered surfaces.

For long-lasting protection after cleaning, we recommend applying a suitable Guard Industry sealer to help protect the surface against future staining, moisture and environmental contamination.

Bring Surfaces Back to Life


Whether you’re cleaning exterior walls, revitalising roofs or restoring paving, Guard Wash® delivers powerful results you can see.

Simple to apply by sprayer or brush, Guard Wash® works quickly to lift dirt and contamination from surfaces. Depending on the level of soiling, results continue to improve after application as the product keeps working over time.

A High-Performance Cleaner for Porous Surfaces


GuardWash® is a high-performance cleaner formulated to remove organic staining and common surface contamination from porous building materials. It effectively tackles mould, mildew, algae, moss, tannins, leaf marks, pollution, greasy stains and other moisture-related soiling that can build up on exposed surfaces.

Fast Deep Cleaning Action


GuardWash® is designed for simple, efficient application. Apply the product directly to the affected surface and allow it to work—no rinsing is normally required. For surfaces where residue needs to be removed, GuardWash® can be rinsed approximately 24 hours after application.

The product can also be left on the surface to provide a residual cleaning effect.

Its powerful formula penetrates deep into the surface to break down stubborn organic build-up without damaging the material underneath. Ideal for both residential and commercial applications, Guard Wash® delivers professional-grade cleaning results with minimal effort.

Guard Wash® can be used on renders, walls, roofs, floors, paving, concrete, stone, tiles and other exterior materials, making it a versatile solution for ongoing maintenance and restoration projects.

Gentle on Porous Building Materials


GuardWash® is free from potash, hydrochloric acid and phosphoric acid. Unlike harsh acidic or corrosive cleaning products, it is designed to clean without damaging suitable treated surfaces or altering their colour.

This makes GuardWash® a versatile choice for cleaning and maintaining porous materials including concrete, natural stone, artificial stone and terracotta.

Key Benefits


  • Removes mould, algae, lichen and organic stains
  • Restores surfaces to a clean, like-new appearance
  • Suitable for walls, roofs, floors and render
  • Fast-acting and easy to apply
  • Helps maintain and extend surface appearance  

Ideal for Green and Black Staining


Porous surfaces exposed to moisture and the elements can develop unsightly green, black or brown staining over time. GuardWash® is specifically designed to address organic contamination such as mould, mildew, algae, moss and tannins, helping restore the appearance of weathered surfaces.

For long-lasting protection after cleaning, we recommend applying a suitable Guard Industry sealer to help protect the surface against future staining, moisture and environmental contamination.

Bring Surfaces Back to Life


Whether you’re cleaning exterior walls, revitalising roofs or restoring paving, Guard Wash® delivers powerful results you can see.

Simple to apply by sprayer or brush, Guard Wash® works quickly to lift dirt and contamination from surfaces. Depending on the level of soiling, results continue to improve after application as the product keeps working over time.

Guard Wash

How to Apply Guard Wash

Guard Wash

How to Apply
Guard Wash

Application


    • Guard Wash® is ready to use, do not dilute.
    • Always test on the material before application.
    • Spray onto a dry or slightly damp material.

Recommendation:

    • Dirty material+ = 1 coat.
    • Dirty material++ = 2 coats. 1 hour interval.
    • Dirty material+++ = 3 coats. 1 hour interval.
    • On vertical surfaces, always apply from bottom to top.
    • Rinsing is not required, but removes the last residue. – If rinsing, wait 24 hours and use a high-pressure cleaner.
    • Before repainting or applying a protective product, the material must be completely rinsed off and dry (refer to the finishing product data sheet).

Uses


GuardWash® is suitable for a wide range of exterior surfaces affected by organic staining and weather-related contamination, including:

      • Roofs and roof tiles
      • Walls and rendered surfaces
      • Balconies and awnings
      • Paving and garden stones
      • Fences, decks and outdoor furniture
      • Fountains and ponds
      • Monuments and garden ornaments
      • Boat hulls
      • Tennis courts
      • Landscaping and other porous building materials

GuardWash® can also be used to help restore weathered timber fencing and outdoor furniture.

Indicative Coverage


    • approx 6m2/L
    • ​Coverage will vary depending on the porosity of the surface.

Tools Required


    • Low pressure garden type low pressure sprayer

Application


    • Guard Wash® is ready to use, do not dilute.
    • Always test on the material before application.
    • Spray onto a dry or slightly damp material.

Recommendation:

    • Dirty material+ = 1 coat.
    • Dirty material++ = 2 coats. 1 hour interval.
    • Dirty material+++ = 3 coats. 1 hour interval.
    • On vertical surfaces, always apply from bottom to top.
    • Rinsing is not required, but removes the last residue. – If rinsing, wait 24 hours and use a high-pressure cleaner.
    • Before repainting or applying a protective product, the material must be completely rinsed off and dry (refer to the finishing product data sheet).

Uses


GuardWash® is suitable for a wide range of exterior surfaces affected by organic staining and weather-related contamination, including:

      • Roofs and roof tiles
      • Walls and rendered surfaces
      • Balconies and awnings
      • Paving and garden stones
      • Fences, decks and outdoor furniture
      • Fountains and ponds
      • Monuments and garden ornaments
      • Boat hulls
      • Tennis courts
      • Landscaping and other porous building materials

GuardWash® can also be used to help restore weathered timber fencing and outdoor furniture.

Indicative Coverage


    • approx 6m2/L
    • ​Coverage will vary depending on the porosity of the surface.

Tools Required


    • Low pressure garden type low pressure sprayer
Natural Protection. Proven Performance

Bio-Based Barrier Technology

Guard Wash
Guard Wash
Natural Protection. Proven Performance

Bio-Based Barrier Technology

Guard Wash

Proven Results 
from Guard Industry


Products Respectful
of the Environment

Fast Delivery, 
Australian Warehousing

Australian Owned 
& Operated

30 Day 
Satisfaction Guarantee

Proven Results from Guard Industry

Products Respectful
of the Environment

Fast Delivery, 
Australian Warehousing

Australian Owned 
& Operated

30 Day 
Satisfaction Guarantee

We offer Australia-wide shipping with free delivery on orders over $100. Orders are typically dispatched within 2 business days and delivered within 2–10 business days depending on location. All products are shipped from Australian warehouses, and tracking is provided once your order is on its way. 

Once an order has left our premises, it is in the hands of the courier and we are unable to take responsibility for delays or issues in transit.

For further information regarding our Shipping Policy click here

We offer a straightforward 30-day return policy for all products. Items must be unopened, unused, in their original condition, and include proof of purchase. Simply contact us for approval before returning your item. Once received and assessed, approved returns will be refunded to your original payment method within 5–7 business days. Warranty claims are also supported, with replacement or refund options where applicable.

For further information regarding our Returns Policy click here

You can reach our customer support team by emailing us or calling 1300 249 767. Our dedicated team will assist you with any inquiries or issues.

We’re committed to providing prompt and effective solutions to ensure your satisfaction.

Yes - free shipping Australia wide on all orders over $100. 
Orders are dispatched from the warehouse nearest to your location for the fastest possible delivery.

We currently only sell within Australia and New Zealand. Our French parent company produces equivalent products available in Europe. For international enquiries, contact us and we can point you in the right direction.

Yes. WA Sealers distributes our products in Western Australia and sells 250ml samplers of most products. For other states, we deliver nationwide via our online shop. 


Have a different question?  Check out our Frequently Asked Questions Page 


Commonly 
Asked Questions

Sign Up Here To Get Exclusive Offers & Product News:

Thanks for registering!


We offer Australia-wide shipping with free delivery on orders over $100. Orders are typically dispatched within 2 business days and delivered within 2–10 business days depending on location. All products are shipped from Australian warehouses, and tracking is provided once your order is on its way. 

Once an order has left our premises, it is in the hands of the courier and we are unable to take responsibility for delays or issues in transit.

For further information regarding our Shipping Policy click here

We offer a straightforward 30-day return policy for all products. Items must be unopened, unused, in their original condition, and include proof of purchase. Simply contact us for approval before returning your item. Once received and assessed, approved returns will be refunded to your original payment method within 5–7 business days. Warranty claims are also supported, with replacement or refund options where applicable.

For further information regarding our Returns Policy click here

You can reach our customer support team by emailing us or calling 1300 249 767. Our dedicated team will assist you with any inquiries or issues.

We’re committed to providing prompt and effective solutions to ensure your satisfaction.

Yes - free shipping Australia wide on all orders over $100. 
Orders are dispatched from the warehouse nearest to your location for the fastest possible delivery.

We currently only sell within Australia and New Zealand. Our French parent company produces equivalent products available in Europe. For international enquiries, contact us and we can point you in the right direction.

Yes. WA Sealers distributes our products in Western Australia and sells 250ml samplers of most products. For other states, we deliver nationwide via our online shop. 


Have a different question?
Visit our Frequently Asked Questions Page 


Commonly 
Asked Questions

Sign Up Here To Get Exclusive Offers & Product News:

Thanks for registering!